State Forest Boundary Fencing Guidelines
Clearing State forest fencelines
At Forestry Corporation, we recognise the need to balance the environmental effects of clearing State forest with the fire protection and fencing needs of forest neighbours.
Subject to meeting threatened species and other legislative requirements, State forest neighbours are permitted to clear trees and inflammable material from boundary fencelines for a variable width up to a maximum of 5.0 metres inside the State forest boundary. This is to minimise the risk of damage to the fenceline from falling timber and wildfire.
The approved width will be the minimum consistent with the needs of the neighbour and taking into account the environmental sensitivity and economic value of the forest.
Clearing width of timber cover will be restricted to a maximum of one blade width (3.0 metres) where the area contains merchantable timber or is zoned Forest Management Zone (FMZ) 2 or 3A (see FMZ map here). A lesser width will apply where it is practical to place the access track on the neighbour’s side of the fence.
Permits to clear fencelines will be authorised after our staff consider a range of factors. The review will include a database search for cultural heritage sites, threatened flora and fauna species, threatened ecological communities and FMZ’s. Debris cleared from the fenceline is to be pushed into the adjoining freehold and must be disposed of by the landholder.
Neighbours can be given an authority to salvage posts free of charge from timber cleared from the fenceline, providing it is not included in an area zoned FMZ 2 or 3A.
The posts can only be cut from trees which have been cleared with a tractor. That is, trees are not to be felled prior to clearing.
Safety issues
The neighbour needs to certify that the tractor used for the clearing is fitted with a ROPS (rollover protection), FOPS (falling object protection) canopy, OPG (operator protection guards) and that the operator is competent.
The FOPS and OPG certification are required where the clearing is limited to regrowth less than 3.0 metres tall.
Neighbours issued with a letter of authority to cut fence posts free of charge from either the fenceline being cleared, or from an adjacent compartment that has current harvesting operations, needs to certify that the person cutting the posts has the appropriate chainsaw competency.
Posts are not to be cut from log dumps being used by a logging crew unless the logging contractor has given his approval and the post operator has been properly safety inducted by the logging crew.
Application for a permit to clear a State forest fenceline PDF, 170.48 KB
For additional information and return of application:
Senior Land Administrator
Forestry Corporation of NSW
PO Box 168
WAUCHOPE NSW 2446
Phone: 02 6585 3744
Email: landadministration@fcnsw.com.au